Grace's Guide

British Industrial History

Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 149,270 pages of information and 234,239 images on early companies, their products and the people who designed and built them.

Engineers and Mechanics Encyclopedia 1839: Railways: John Reynolds

From Graces Guide

Jump to: navigation, search
Im1839Enc-p575a.jpg
Im1839Enc-p575b.jpg

It has been observed that the deflection of the railway bars, by heavy carriages passing over them on the Manchester and other lines of road, absorbs a considerable portion of the tractive force; besides producing, by their vibratory action, an earlier destruction of the stationary, as well as the locomotive mechanism. To provide a remedy for these apparent defects of the ordinary system; John Reynolds, of Neath, has proposed to give to the rails, bars, or plates, an equal support in every part of their length, so that they shall not be susceptible of depression or deflection; and this he proposes to effect by two methods, for which he obtained a patent on the 5th hay, 1835.

The first is by cast-iron bearers laid and joined end to end, and in such manner as to be incapable of vertical or lateral movement, independently of those next adjoining to them. The rails, bars, or plates, over which the carriage-wheels are intended to run, may be either cast on and with the bearers, or they may be separate.

The second method is by bearers formed by blocks of natural or artificial stone, joined end to end, and bedded in the roadway, and secured in such manner together, that they can only move in concert. A great variety of forms of rails, founded upon the basis of construction just mentioned have been made by Mr. Reynolds: it will only be in our power to notice here two or three of them. The annexed figure shows a vertical section of one of the most approved forms, in which the ballasting that it is imbedded in, shown at a-a, is of less depth than the bottom of the stone sleepers generally used, and of considerably less depth than the bottom of the excavation and ballasting on the London and Birmingham Railway.

The form of the bearing rail for the carriage wheels is shown at b, and that of the hollow support and lateral inclined plates at c-c. They are fastened end to end by means of "snugs," or projecting pieces cast to them, of such forms as that, when placed in juxtaposition, a key or wedge is driven into an aperture formed by their union, which holds them firmly together. The blocks of natural or artificial stone are to be joined by the various modes known to masons, and the iron rail above, whether of wrought or cast iron, are also to be fastened by means too well understood to need explanation.

The annexed section represents another cut of the numerous designs given by the patentee represents a wrought-iron rail resting upon and fastened to a sill of timber t, enclosed between the bearing plates g-g, which, together with the fin d, are imbedded in the ballasting.

The advantages contemplated by the patentee are-

1, a great saving in excavation and ballasting;

2, a saving of the cost of materials and laying down;

3, in maintenance of way or permanence of work;

4, saving the repairs of engines.

Some rails on this construction are laid down experimentally on the Liverpool and Manchester Railway line, and apparently stand the test very satisfactorily.

Sources of Information