Automobile Engineer: 1962/05
From Graces Guide
Note: This is a sub-section of the Automobile Engineer
CONTENTS
- Editorial Engine Cooling Problems 167
- Bedford TK Chassis Part II: Description of the various types of frame, and details of the clutch, standard four-speed gearbox and two-speed rear axle 168
- International Forum. Readers' views, and contributions from their experience in respect of subjects of articles we have published recently, P. J. Wallace, R. A. Wilson-Jones, D. Hall 176
- Rubber in Transmissions. A review of Metalastik resilient couplings, vibration dampers and other products designed for automotive applications 178
- Clevebloc Bearings. Some tests carried out to compare the performance of Clevebloc bearings with that of standard Silentbloc components 184
- Books. Brief Comments on recent foreign publications on automobile engineering 186
- Elphal Aluminized Steel. Produced by the electrophoretic deposition of aluminium powder on steel strip in a continuous process developed and patented by the British Iron and Steel Research Association. 188
- Finishing Commercial Bodies. Methods employed at the Ford plant at Southampton for a range of van bodies and truck cabs 191
- Machining Irregular-shape Casings. Pallet-type transfer machine finishes power steering gear casings at production rates up to a maximum of 300 per hour 192
- Austin Car-body Trim Lines. New system of kit-trucks on a separate, synchronized, conveyor line cuts damage and waste of components 195
- Lockheed Vacuum Servo. Interesting and comprehensive test procedures are used during the assembly of a 5 J in brake-servo for medium cars and light commercial vehicles 196
- Descaling Alloy Steels. Use of Berkatekt protective coatings overcomes heat treatment problems, and facilitates selective hardening 201
- Vauxhall Engine Assembly. Pedestal conveyor line extensively equipped with multi-spindle tools
202
See Also
Loading...
Sources of Information