Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 148,434 pages of information and 233,876 images on early companies, their products and the people who designed and built them.
Hulse and Co of Salford, Manchester.
Also known as J. S. Hulse and Co
1852 Firm founded by Joseph Sykes Hulse.
1863 Listed as Joesph Sykes Hulse, Engineer and manufacturer of all kinds of engineers' tools, &c., Ordsal Works, Calder Street, Salford
1881 J. S. Hulse retired and his brother William Wilson Hulse took charge.
Pre-1894 Lathe with 6' 6" dia faceplate and taking 14 ft between centres installed at J. I. Thornycroft's yard at Chiswick 
1894 Davies' Plural drilling machine for locomotive boilers. Article and illustration in 'The Engineer'
1894 Quadruple-geared duplex crank lathe for William Jessop and Son. Illustration.
1896 Hulse open-sided planing machine featured in the American Machinist, who credited the origin of the type to Richards of Manchester, but William Wilson Hulse wrote to the magazine to point out that he had patented it on 9 June 1865 (Pat. No. 1571) 
1900 Article and illustrations on their Belleville Boiler-Making Machinery
1912 Description of an extension to their premises in The Engineer, which included two large new erecting shops 
1920 Large Crank-Shaft Turning Machine
1920 Were suppliers of machine tools
Hulse's Ordsall (Ordsal) Works was originally bounded by the River Irwell, Calder Street, Lower Seddon Street and the Regent Iron Works of Thomas Gadd. In c.1895 they took over the premises of the Regent Iron Works, which faced onto Regent Road.